Owners manual

BX1842
2008-12 Nissan Innity G37S
Installation Instructions
292-3023 Rev. A Page 6 of 9 6/1/12
13. To install the baseplate raise up as high as
possible until it hits the bottom of the bracket
and as far back as it will go. Be sure it is level
and clamp. Do this on both sides.
14. Using the baseplate as a template drill two
holes into the side of the frame with the 13/32”
drill bit. Do this on both sides.
13 14




16
16. Use the 1 1/4” hole saw to drill the hole on the
back side in order to insert the 61-5208s. Do
this on both sides.

15. Also using the 13/32” drill bit, drill the back
hole on the bottom of the plate (see gray
arrow on #13). Do this on both sides.
15
