Owners manual
BX1842
2008-12 Nissan Innity G37S
Installation Instructions
292-3023 Rev. A Page 3 of 9 6/1/12
1. Using a at screwdriver, remove seven (7)
push pins from the at plastic piece on top of
fascia. Set push pins aside to be reinstalled
later.
Vehicle Weight
The weight of this vehicle is near the Class III, 5,000
lb. rating limitations. Some models, depending on
options, may well exceed this 5,000 lb rating. Be sure
to conrm the weight of your individual vehicle before
towing. As of 1999 the Aventa
®
II is now 10,000 lbs.
and either
the Aventa
®
II or the Aventa
®
LX tow bar must be used
for these applications.
Tow Bar Adapters are NOT to be used with
vehicles weighing over 5,000 lbs.
Installation Notes
The fascia, bumper, bolts and push pins are removed
and reinstalled
The dimensional variations between otherwise
identical vehicles can be considerable. While the
baseplate was designed for easy installation, it
may be necessary to tailor the baseplate slightly
to compensate for auto manufacturer’s tolerances.
These minor adjustments may include ling a hole
slightly, bending electrical rods and/ or bending end
plates.
The BX8848 Diode Wiring Kit is recommended for this
vehicle.
Installation Instructions
1
2
2. Pull back cover on the top above the front tire.
Use a 10MM socket to remove the bolt. Do
this to both sides of the vehicle. Set bolt aside
to be reinstalled later.