Owners manual

BX1711
2014 GMC Sierra 1500 (Includes Denali)
Installation Instructions
405-0361 Page 5 of 7 9/25/13
5. Using a 18MM socket, remove the four (4)
bolts from the top of the bumper. There
are two (2) on each side.
6. Using a 15MM socket, remove the bolt
from the bumper reinforcement bar.
Do this on both sides of the vehicle.
Disconnect the running lights/electrical
connections (gray) and set the bumper
aside.
7. Using a 15MM socket, remove the three
(3) bolts from the cover plate. Do this on
both sides of the vehicle.
8. Using a 18MM socket/wrench, remove the
two (2) bolts from the tow hook. Do this on
both sides of the vehicle.









