Owners manual

BX1711
2014 GMC Sierra 1500 (Includes Denali)
Installation Instructions
405-0361 Page 4 of 7 9/25/13
1. Remove the twelve (12) push pins from
the fascia cover. There are six (6) on each
side. Set the cover aside.
2. Using a 10MM socket, remove the four (4)
screws from the top edge of the fascia.
There are two (2) on each side.
3. Using a 10MM socket, remove the four (4)
screws from the underside of the fascia.
There are two (2) in the middle and one
(1) on each side.
4. Using a 7MM socket, remove the screw
from the wheel well (white). Using a T15
Torx, remove the upper screw (gray). Do
this on both sides of the vehicle. Unsnap
the fascia from the body and set aside.








 


