Owners manual

BX1709
2002-09 Chevy Trailblazer / GMC Envoy 2004-07 Buick Rainier
2003-06 Isuzu Ascender 2002-04 Oldsmobile Bravada
Installation Instructions
405-0345 Page 7 of 8 9/23/13
13. Using a 17/32” drill bit, drill the two (2)
side baseplate holes thru the frame. Install
a 1/2”-13 x 1-3/4” bolts and a 1/2” lock
washers into the holes with a 1/2” nut
plates on the inside of the frame. Fully
tighten the hardware. Do this on both
sides of the vehicle.
14. Reinstall the bumper using the supplied
5/8”-11 x 8” bolts, 5/8” at & lock washers
and 5/8”-11 hex nuts.
15. Attach the permanent baseplate safety
cables to the provided convenience link on
the baseplate. The photo above shows the
recommended installation of the cables to
frame of vehicle. Additional options may
interfere with suggested mounting; in this
case, secure the cables to a solid piece of
the frame as described in the instructions
included with the permanent baseplate safety
cables. Be sure the safety cables do not rub
against any hoses or moving parts. Do this
on BOTH sides of the vehicle.


