Manualshelf

Owners manual

ManualsBrandsBlue Ox ManualsAutomotiveBX1683 Tow Bar Base Plate Fits 09-12 Traverse
12345678
BX1683
2009-12 Chevy Traverse
Installation Instructions
405-0049 Rev. D Page 4 of 8 11/04/11
3
4
3. Using a 7MM socket (may possibly require T15 Torx), remove three (3) bolts connecting the fascia across the top. Do
this to both sides of the vehicle. Set bolts aside to be reinstalled later.
4. Remove two (2) screws (white arrows) just forward of the front tire, on the edge of the fascia with a Phillips
screwdriver. Using a 7MM socket (may possibly require T15 Torx), also remove the hex bolt from the top (gray arrow).
Do this to both sides. Set screws and bolts aside for later reinstallation.
65
5. Remove two (2) screws (white arrows) from under the fascia with a screwdriver. Using a 10MM socket (may possibly
require T15 Torx), also remove the hex bolt (gray arrow) from under the fascia. Do this to both sides. Pull fascia
corners to the side of vehicle to release, then pull fascia forward and set fascia aside carefully for later reinstallation
along with bolts and screws.
6. Under the front bumper, remove the push pin from the plastic piece then cut straight across and straight down. Do
this to both sides.