Owners manual

BX1683
2009-12 Chevy Traverse
Installation Instructions
405-0049 Rev. D Page 2 of 8 11/04/11
Important:
Use only genuine factory replacement parts on your baseplate. Do NOT substitute homemade or non-typical parts. If a bolt is lost or in need of
replacement, for your safety and the preservation of your baseplate, be sure to use a replacement bolt of the same grade (In most cases it will be Grade
5, please reference the parts list above). Replacement parts may be ordered through your nearest Blue Ox® Dealer or Distributor. Failing to follow and/
or altering these installation instructions in either installation or required equipment will void the manufacturer’s warranty. Towing behind a non-motorized
vehicle will void the warranty.
Tools Required
7MM Socket Phillips Screw Driver
10mm Socket Utility Knife
9/16” Socket & Wrench Tape Measure
Large Vise Grips 1” Hole Saw `
Reciprocating Saw 13/32” Drill Bit
Drill 1/2” Drill Bit
Flat Screw Driver T15 Torx
Loctite
®
RED
Parts List
Ref. No. Qty. Part # Description
1 1 61-6614 BX1683 Baseplate
2 4 61-5208 1/4” x 1” x 1”, 3/8” with 14” Wire
3 4 201-0443 3/8”-16 x 1” Hex Head Bolt, Grade 5
4 4 201-0440 3/8”-16 x 1-1/2” Hex Head Bolt, Grade 5
5 8 203-0010 3/8” Lock Washer
6 4 202-0003 3/8”-16 Hex Nut, ZP
7 2 201-0553 1/4”-20 x 1/2” Hex Wshd.Type F TCS, ZP
8 2 201-0192 10-32 x 1/2” Slotted Round Head Screw
9 2 203-0054 #10 Lock Washer
10 2 202-0047 #10-32 Hex Nut
11 2 101-5822 4 Way Connector Adapter
12 2 62-3469 Attachment Tab with Hole
Not shown 18 203-0001 1/4 Flat Washer, ZP
Not shown 2 226-0046 36” Class III Safety Cable
Not shown 2 229-0359 3/8” Quicklink
Not shown 2 290-0437 Black Receiver Cap Plug