Owners manual

Page 3 of 6 292-5695 8/6/08
Removable Tabs:
Motorhome mount tow bars are recommended for use with this baseplate. Due to the design of the
removable tabs, the RangeFinder II, Adventurer, and Ambassador tow bars can not be used. The
Acclaim tow bar may be used, but will not fold and store on the front of the vehicle. Adapters, except
the BX8833 and the BX88151, can not be used with this baseplate.
Installation Notes:
The front fascia, horn and windshield washer reservoir are removed and reinstalled for the
baseplate installation. Drilling is required. Some trimming of the air dam is required.
The dimensional variations between otherwise identical vehicles can be considerable. While the
baseplate was designed for easy installation, it may be necessary to tailor the baseplate slightly
to compensate for auto manufacturer’s tolerances. These minor adjustments may include fi ling
a hole slightly, bending electrical rods, and/ or bending end plates.
The BX8869 Bulb and Socket Wiring Kit is recommended for this vehicle.
Installation Instructions:
1. Remove four pushpins from the top side of the
fascia. Set the pushpins aside to be reinstalled
later.
1
1
2. Using the 7MM socket, remove three metric
bolts inside the wheel well. Do this to both
sides of the vehicle.
2
2
2000-05 Chevrolet Cavalier
Installation Instructions
BX1647