Owners manual
Attachment Tabs: Motorhome mount tow bars are recommended for use with this baseplate.
Due to the design of the removable tabs, the RangeFinderII and Ambassador tow bars can not
be used. Adapters, except the BX8833 and BX88151 can not be used with this baseplate.
Installation Notes: The fascia, horn, air bafe and bumper are removed for installation.
Drilling is required.
The dimensional variations between otherwise identical vehicles can be considerable. While
the baseplate was designed for easy installation, it may be necessary to tailor the baseplate
slightly to compensate for auto manufacturer’s tolerances. These minor adjustments may
include ling a hole slightly, bending electrical rods or bending end plates.
The BX8848 4-Diode Wiring Kit is recommended for this vehicle.
Installation Instructions:
1
Page 3 of 8 405-0160 Rev E 08/24/12
1. Using a T20 torx remove three bolts on each side from the plastic piece covering the top front of the under
carriage. Set the plastic piece and the bolts aside for later reinstallation.
2. Forward of the front tire on the edge of the fascia, using a T20 torx, remove the three screws. Do this on both
sides. Set the screws aside for later reinstallation.
2
2
2011-2013 Buick Regal CXL
(No Turbo)
Installation Instructions
BX1516
Handling of some cosmetic parts when
installing this product may require the
use of protective covers, rags, specialty
tools, etc. to prevent damage.
Do not use the towed vehicle for storing
luggage, equipment, etc. This may cause
you to exceed the towing capacity of the
tow bar, baseplate, and its accessories.