Owners manual

405-0210 Rev. E Page 6 of 7 1/25/12
2011 Jeep Liberty Renegade
2012 Jeep Liberty Sport
Installation Instructions
BX1131
8. Push the coolant line
brackets up as far as
it will go with a large
vise grip.
7. On the driver side only, move the coolant lines
down and remove the push pin.
DS
9. Attach baseplate to the underside of the bumper using the existing two (2) holes. Use a 3/8"-16 x 2" bolt,
3/8" at & lock washer with a 3/8" nut plate for each hole.
DS
PS
10. Using the endplate as a template, drill an additional hole using a 13/32" drill bit. Install a 3/8"-16 x
1-1/2" bolt, 3/8" lock washer and 3/8" nut plate into hole.
PS
DS