Owners manual

BX1130
2011-13 Jeep Patriot
Installation Instructions
405-0178 Rev. C Page 3 of 9 6/12/12
Attachment Tabs: Motorhome mount
tow bars are recommended for use with this
baseplate. Due to the design of the removable
tabs, the RangeFinderII and Ambassador tow bars
can not be used. Adapters, except the BX8833
and BX88151, can not be used with this baseplate.
Installation Notes: The fascia, horn,
computer and temperature sensor are removed
for the baseplate installation. Trimming of the
frame and fascia are required. Drilling is required.
The dimensional variations between otherwise
identical vehicles can be considerable. While
the baseplate was designed for easy installation,
it may be necessary to tailor the baseplate
slightly to compensate for auto manufacturer’s
tolerances. These minor adjustments may include
ling a hole slightly, bending electrical rods or
bending end plates.
The BX8869 Bulb and Socket Wiring Kit is
recommended for this vehicle.
1. Using a 10MM socket, remove one (1) bolt
from the top corner of the fascia (driver’s side
shown in photo). Do this on both sides of the
vehicle. Set bolts aside to be reinstalled later.
Installation Instructions
1
2
2. Remove seven (7) bolts from across the top of
the fascia with a T20 Torx (driver’s side shown
in photo). Set bolts aside to be reinstalled
later.



Handling of some cosmetic parts when
installing this product may require the
use of protective covers, rags, specialty
tools, etc. to prevent damage.

Possible location for the BX8869 Bulb
and Socket Wiring Kit.
Do not use the towed vehicle for storing
luggage, equipment, etc. This may cause
you to exceed the towing capacity of the
tow bar, baseplate, and its accessories.