Owners manual

3. Under the fascia remove the two pushpins
in front of the tire. Do this to both sides of
vehicle. Set pushpins aside to be reinstalled
later.
3
3
4
4
2008-10 Jeep Patriot
Installation Instructions
BX1127
4. In the middle under the fascia, remove the two
clips by pushing the sides of the clip together
with a small screw driver. Set the clips aside
to be reinstalled later.
Page 4 of 7 292-3047 Rev. D 10/20/09
Ô
Ô
Ô
Ô
Ô
Ô
Ô
Ô
6. On the driver’s side, remove the two Christmas
tree pins and unplug the horn. Using a 13MM
socket, remove the two bolts (gray arrows).
Set bolts aside to be reinstalled later.
5. In front of the tire pull the wheel well cover
back to remove the bolt with a 7MM socket.
Do this on both sides. Set the bolt aside to
be reinstalled later. Pull forward on the fascia
to remove it, disconnect the turn signals and
running lights (if applicable). Do this on both
sides. Set the fascia aside carefully to be
reinstalled later.
6B
6B
Ô
Ô
5
5
6A
6A
Ô
Ô
Ô
Ô
Ô
Ô
Ô
Ô
Ô
Ô