Owners manual

Important:
Use only genuine factory replacement parts on your baseplate. Do NOT substitute homemade or non-typical parts. If a
bolt is lost or in need of replacement, for your safety and the preservation of your baseplate, be sure to use a replacement
bolt of the same grade (In most cases it will be Grade 5, please reference the parts list above). Replacement parts may be
ordered through your nearest Blue Ox® Dealer or Distributor.
Page 2 of 7 292-3047 Rev. D 10/20/09
2008-10 Jeep Patriot
Installation Instructions
BX1127
Tools Required
Loctite
®
RED
7MM Socket
10MM Socket
9/16” Socket
T20 Torx
Large Vise Grips
Reciprocating Saw
13/32” Drill Bit
Flat Screwdriver
Parts List
Ref. No. Qty. Part # Description
1 1 61-6533 WELDMENT, BASEPLATE, BX1127
2 8 61-5208 WLDT, NUT PLATE, 1/4X1X1, 3/8 BLT WIRE
3 1 102-6889 SPACER,1/2 X 1 X 1 1/2” (W .531 HOLE)
4 5 201-0440 3/8-16 X 1 1/2 HEX BOLT, GRADE 5, ZP
5 3 201-0444 3/8-16 X 2 HEX BOLT GRADE 5, ZP
6 8 203-0010 3/8 LOCK WASHER, ZP
7 2 201-0553 1/4-20 X 1/2 HX.WSHD.TYPE F TCS, ZP
8 2 201-0192 10-32 X 1/2 SLOT, RD. HD. SCREW
9 2 203-0054 #10 LOCK WASHER
10 2 202-0047 #10-32 HEX NUT
11 2 101-5822 ADAPTER, 4 WAY CONNECTOR
12 2 62-3469 ATT TAB ASSY, REM, SF/LB, 1 HOLE
2 226-0046 BASEPLATE SAFETY CABLE, 36” CL III (NS)
2 229-0359 QUICKLINK, 3/8, ZP (Not Shown)
2 290-0437 RECEIVER, CAP PLUG (BLACK) (Not Shown)
ELECTRICAL CONNECTOR
6WAYROUND
4WAY ROUND
ELECTRICAL CONNECTOR