Owners manual

2006-10 Jeep Commander

Installation Instructions

BX1125

4. Just forward of the front tire, inside the wheel

well, remove three rivets with the diagonal cutters.

Discard rivets as new rivets are provided for

reinstallation of the fascia.

5. Using a 10MM socket, remove two metric bolts on

the bottom side of the fascia. Set bolts aside to be

reinstalled later.

6. Release the three clips from inside of the wheel

well, just forward of the front tire, on the fender

guard. Disconnect fog lights (if applicable). Pull

forward on the fascia and set it aside carefully to be

reinstalled later.

Page 4 of 7 292-2795 Rev. G 9/27/10

3. Remove four pushpins from the top of front fascia.

Set pushpins aside to be reinstalled later.