Owners manual

2006-10 Jeep Commander
Installation Instructions
BX1125
Parts List
Ref. No. Qty. Part # Description
1 1 61-6199 Weldment, Baseplate, BX1125
2 8 61-5208 Weldment, 3/8-16 Nut Plate, w/ 14” Wire
3 2 102-5461 Backing Plate
4 8 201-0440 3/8-16 x 1 1/2” Hex Bolt, Grade 5, ZP
5 8 203-0010 3/8” Lock Washer, ZP
6 2 201-0553 1/4-20 x 1/2” Hx. Wshd, Type F Screw
7 2 201-0192 #10-32 x 1/2” Slot, Rd. Hd. Screw
8 2 203-0054 #10-32 Lock Washer
9 2 202-0047 #10-32 Hex Nut
10 2 101-5822 Adapter, 4 Way Connector
11 2 62-3468 Attachment, Assembly, SF/SB (R)
2 226-0046 Baseplate Safety Cable, 36” CL III (Not Shown)
4 229-0359 Quicklink, 3/8, ZP (Not Shown)
6 229-0536 Plastic Rivet (Not Shown)
2 290-0437 Cap Plug, Black (Not Shown)
Important:
Use only genuine factory replacement parts on your baseplate. Do NOT substitute homemade or non-typical parts. If a bolt is lost or in
need of replacement, for your safety and the preservation of your baseplate, be sure to use a replacement bolt of the same grade (In most
cases it will be Grade 5, please reference the parts list above). Replacement parts may be ordered through your nearest Blue Ox
®
Dealer
or Distributor. Failing to follow and/or altering these installation instructions in either installation or required equipment will void the
manufacturer’s warranty. Towing behind a non-motorized vehicle will void the warranty.
10MM Socket
15MM Socket
9/16” Socket
13/32” Drill Bit
Vise Grip
Diagonal Cutter
Loctite
®
RED
Plastic Rivet Gun
Tools Required
Page 2 of 7 292-2795 Rev. G 9/27/10