SAYLOR Dining TABLE ASSEMBLY instructions
Before You Begin: You already know this, but it’s best to read ALL the instructions before assembly. Failure to do so may result in faulty assembly and potential injury ( no one wants that kind of stain on their party hosting record). Assemble your Blue Oak™ outdoor furniture on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items (there’s no “i” in “team”).
PARTS NO. DESCRIPTION QTY A Table Leg 2 B Connector 1 C Table Top 1 D Umbrella Cap 1 HARDWARE NO.
Assembly Instructions Take a deep breath and keep a clear spot nearby where you can place the small pieces. Note: Do not fully tighten the bolts until you’ve completed the assembly and checked to see if the alignment is correct. Step 1 Place the table top (C), table legs (A) and connector (B) on a soft, non-abrasive surface such as cardboard or a blanket. Step 2 See Figures 1 and 2.
Step 3 See Figure 3. Use the wrench (EE) to attach the assembled table base to the table top (C) with 4 M8x20 bolts (AA), M8 washers (CC) and lock washers (BB). AA A BB B CC C A C A Figure 3 Step 4 Fully tighten all bolts and apply bolt head caps (DD) to each bolt. Step 5 See Figure 4. Turn the table upright and use the umbrella cap to cover the umbrella hole.
blueoakoutdoor.
