SDS

Mill-Rose Co. Blue Monster™ PTFE Pipe Thread Sealant Page 6 of 6
Section 15. REGULATORY INFORMATION
U.S. federal regulatory information:
U.S. RCRA (40 CFR 261)
This product is not a hazardous waste as defined under RCRA 40 CFR 261.
State and community right-to-know regulations:
The following component(s) of this material are identified on the regulatory lists below:
U.S. TSCA Chemical inventory Section 8(b)
OSHA — This product is determined to be hazardous as defined in the OSHA Hazard
Communications Standard (29 CFR 1910.1200)
.
CERCLA Sections 102a/103 (40 FR 302.4):
No ingredients are listed.
Some Components of this product are listed in the following sections of SARA:
SARA Title III Section 302 — N/A
SARA Title III Section 304 — N/A
SARA Title III Section 313
— Ethylene glycol butyl ether (2-Butoxyethanol) 1% reporting threshold
Isopropyl alcohol (2-Propanol) 100 % reporting threshold
SARA Title III Sections 311/312 Hazardous Categories (40 CFR 370.21)
Acute health hazard: Yes
Chronic health hazard: Yes
Fire hazard: No
Reactive Hazard: No
Pressure Hazard: No
California Proposition 65 Components
This product does not contain any chemicals known to the State of California to cause cancer,
birth defects, or any other reproductive harm.
WHMIS (Canada)
Class D-2B: Material causing other toxic effects
NOTE: User must consult with applicable state and local agencies for special specifics,
determinations or compliance obligations regarding this product.
Section 16. OTHER INFORMATION
Standards and Certification Listings:
The information and recommendations contained herein are based upon tests, data, and
information resources believed to be reliable. However, The Mill-Rose Company and its
related operations or divisions not guarantee the accuracy or completeness, nor shall any
of this information constitute a warranty, whether expressed or implied, as to the safety of
goods, the merchantability of the goods or the fitness of the goods for a particular
purpose. Adjustment to conform to actual conditions of usage may be required. The Mill-
Rose Company assumes no responsibility for results obtained or for incidental or
consequential damages, including lost profits, arising from the use of this data. No
warranty against infringement of any patent, copyright or trademark is made or implied.