User guide

38
39
Harness Buckle Removal
Fully recline the child seat.1
Locate the metal buckle strap retainer on 2
the bottom of the child seat.
Pull the retainer away from the child seat 3
to loosen.
Turn the retainer so the short side will 4
fit through the slot in the child seat shell
(Fig. A).
Push the retainer through the slots in the shell and cover, to the 5
top of the child seat.
Re-threading the Harness Buckle
Locate the slot in cover and shell for the harness buckle.1
Turn the buckle retainer so the short side will fit through the slot 2
in the cover and the child seat shell (Fig. A).
Push the retainer through the slots in the shell and cover, to the 3
bottom of the child seat.
Pull the harness buckle away from the child seat until tight and 4
verify the strap is not twisted and the release button is facing
outward.
A
Cleaning the Harness Buckle
If a child eats and drinks while in the child
seat, the harness buckle may need to be
periodically checked and cleaned of any
food, drink or other debris.
REMOVE BUCKLE as described on page •
38.
THOROUGHLY RINSE using warm water •
(Fig. B).
TEST THE HARNESS BUCKLE by fastening •
(Fig. C) and unfastening (Fig. D) until a
positive click is heard after inserting each
buckle tongue. If either click is not heard,
repeat cleaning procedure.
TOWEL DRY•
DO NOT• lubricate, use solvents, abrasive
cleaners, soap or other household
detergents.
b
x 2
x 2
D
x 2
x 2
c
Care and Maintenance Care and Maintenance