Replacement Part List

VIBRATION SAFETY
4. Always use guards and eye
shields.
5. Do not overtighten wheel nut.
6. Use only flanges furnished with
the grinder.
7. Adjust distance between wheel
and work rest to maintain 0.125”
or less separation as the diameter
of the wheel decreases with use.
8. Frequently clean grinding dust
from beneath grinder.
9. Wear a full face shield over
ANSI-approved safety goggles
during use.
10. Do not grind with side of wheel
unless wheel is specifically
designed for that type of grinding.
11. DO NOT OPERATE WITH ANY
GUARD DISABLED, DAMAGED,
OR REMOVED. Moving guards
must move freely and close
instantly.
12. The use of accessories or
attachments not recommended
by the manufacturer may result
in a risk of injury to persons.
13. When servicing use only
identical replacement parts.
14. Only use safety equipment that
has been approved by an
appropriate standards agency.
Unapproved safety equipment
may not provide adequate
protection. Eye protection must
be ANSI-approved and breathing
protection must be NIOSH-
approved for the specific hazards
in the work area.
15. Stay alert, watch what you are
doing and use common sense
when operating a power tool.
Do not use a power tool while
you are tired or under the
influence of drugs, alcohol or
medication. A moment of
inattention while operating
power tools may result in serious
personal injury.
16. Industrial applications must follow
OSHA guidelines.
17. Maintain labels and nameplates
on the tool. These carry important
safety information.
18. Avoid unintentional starting.
Prepare to begin work before
turning on the tool.
19. People with pacemakers should
consult their physician(s) before
use. Electromagnetic fields
in close proximity to heart
pacemaker could cause
pacemaker interference or
pacemaker failure.
20. WARNING: Some dust created
by power sanding, sawing,
grinding, drilling, and other
construction activities, contains
chemicals known to the State of
California to cause cancer and
birth defects or other reproductive
harm. Some examples of these
chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and
cement or other masonry products
• Arsenic and chromium from
chemically treated lumber.
Your risk from these exposures
varies, depending on how often
you do this type of work. To reduce
your exposure to these chemicals:
work in a well ventilated area, and
work with approved safety equipment,
such as those dust masks that are
specially designed to filter out
microscopic particles. (California
Health & Safety Code § 25249.5,
et seq.)
21. WARNING: The cord of this
product contains lead and/or di
(2-ethylhexyl) phthalate (DEHP),
chemicals known to the State of
California to cause cancer, and
birth defects or other reproductive
harm. Wash hands after handling.
(California Health & Safety
Code § 25249.5, et seq.
22. The warnings, precautions, and
instructions discussed in this
instruction manual cannot cover
all possible conditions and
situations that may occur. It must
be understood by the operator
that common sense and caution
are factors which cannot be built
into this product, but must be
supplied by the operator.
This tool vibrates during use.
Repeated or long-term exposure to
vibration may cause temporary or
permanent physical injury, particularly
to the hands, arms and shoulders.
To reduce the risk of vibration-related
injury:
1. Anyone using vibrating tools
regularly or for an extended period
should first be examined by a
doctor and then have regular
medical check-ups to ensure
medical problems are not being
caused or worsened from use.
Pregnant women or people who
have impaired blood circulation
to the hand, past hand injuries,
nervous system disorders, diabetes,
or Raynaud’s Disease should not
use this tool. If you feel any medical
or physical symptoms related to
vibration (such as tingling, numbness,
and white or blue fingers), seek
medical advice as soon as possible.
2. Do not smoke during use. Nicotine
reduces the blood supply to the
hands and fingers, increasing the
risk of vibration-related injury.
3. Use tools with the lowest vibration
when there is a choice between
different processes.
4. Include vibration-free periods each
day of work.
[e-mail]
3
1-800-348-5004