Product Manual

6
BEFORE STARTING, MAKE SURE
YOU HAVE NOTED THE
FOLLOWING INSTRUCTIONS:
• Make sure you have read and
understood the entire instruction
manual.
• Working with this product is
demanding, therefore ensure you are
physically and mentally fit to
complete the job safely.
• Ensure that you have all the
accessories and tools needed for
assembly and operation.
• Make suer that you wear suitable
personal protective equipment.
• Ensure that no unauthorized people,
especially children, and pets are
nearby or could enter the working
area.
• Make sure no explosive or
flammable materials are present.
• Ensure that the product is free from
damage and that it is not worn.
• Ensure that the tank is filled with the
correct fuel/oil mixture.
• Make sure that safety devices and
accessories are correctly fixed.
• Double check that all assembly
tools have been removed from the
product before use.
• Undertake periodic structural
checks of this product, do not use if
you have any doubts about its
suitability for its intended purpose.
WARNING: For your own and the
safety of other people you must
read and follow the safety
instructions in this manual.
INTENDED USE
This brush cutter/string trimmer is
designated with a maximum power
output of maximum 42.6cc.
With the cutter blade attached, this
product is intended to cut small types
of weeds, lawn grass, or similar soft
vegetation.
This product should not be used to
cut unusually thick grass or
vegetation, wet grass, or to shred
leaves, etc.
This product is intended for private
domestic use only. Not for
commercial trade or use. It must not
be used for any purposes other than
those described.
[e-mail]
1. Unscrew and remove the fuel tank
cap (7) (Fig. 11).
2. Only use correctly mixed fuel/oil.
Do not overfill. Leave a minimum
5mm of space between the top of the
fuel and the inside edge of the tank
(6) to allow for expansion (Fig. 12).
3. Use a fuel funnel fitted with a filter
to avoid debris entering the tank.
4. Wipe up spilled fuel with a soft
cloth and refit the fuel tank cap (7).
5. Always dispose of fuel, used oil,
and soiled objects according to local
regulations.
OPERATING CONTROLS