Appliance Trim Kit User Manual

Volume 9: Managing the Blue Coat SG Appliance
76
Failover Statistics
At any time, you can view statistics for any failover group you have configured on your
system.
To view failover statistics:
1. Select
Statistics > System > Failover.
2. From the
Failover Group drop-down list, select the group to view.
The information displayed includes the multicast address, the local address, the state, and
any flags, where
V indicates that the group name is a virtual IP address, R indicates that
the group name is a physical IP address, and
M indicates that this machine can be
configured to be the master if it is available.
Active Sessions—Viewing Per-Connection Statistics
The Statistics > Active Sessions pages display per-connection statistics for all proxied
sessions and bypassed connections running through the SG appliance.
The following figure shows an example of the
Active Sessions pages.
The
Active Sessions feature has two pages:
❐ Proxied Sessions—Displays statistics for all connections intercepted by configured
proxies or services
To learn more about proxied sessions, see “Analyzing Proxied Sessions” on page 77.
❐ Bypassed Connections—Displays statistics for all unintercepted traffic
To learn more about bypassed connections, see “Analyzing Bypassed Connections
Statistics” on page 84.