Appliance Trim Kit User Manual

Volume 9: Managing the Blue Coat SG Appliance
40
Troubleshooting Tip
If the SG appliance does not come up after rebooting and the serial port is connected to a
terminal server (terminal concentrator), try the following:
❐ Have an active session open on the terminal server, noting any traffic (characters)
being output.
❐ Unplug the terminal server from the appliance in case it is causing a problem (such as
bad cabling).
Managing SG Appliance Systems
The SG appliance Systems tab displays the five available systems. Empty systems are
indicated by the word
Empty.
The system currently running is highlighted in blue and cannot be replaced or deleted.
From this screen, you can:
❐ Select the SGOS system version to boot.
❐ Lock one or more of the available SGOS system versions.
❐ Select the SGOS system version to be replaced.
❐ Delete one or more of the available SGOS system versions (CLI only).
❐ View details of the available SGOS system versions.
To view SGOS system replacement options:
Select
Maintenance > Upgrade > Systems.
To view details for an SGOS system version:
1. Select
Maintenance > Upgrade > Systems.
2. Click
Details next to the system for which you want to view detailed information; click
OK when you are finished.