Appliance Trim Kit User Manual

Chapter 2: Monitoring the SG Appliance
29
4. Click Edit to modify the threshold and notification settings. The Edit Health Monitor
Setting
dialog displays. (hardware, environmental, and ADN thresholds cannot be
modified.)
5. Modify the threshold values:
a. To change the critical threshold, enter a new value in the Critical Threshold
field.
b. To change the critical interval, enter a new value in the Critical Interval field.
c. To change the warning threshold, enter a new value in the Warning Threshold
field.
d. To change the warning interval, enter a new value in the Warning Interval
field.
6. Modify the notification settings.
•
Log adds an entry to the Event log.
•
Trap sends an SNMP trap to all configured management stations.
•
Email sends an e-mail to the addresses listed in the Event log properties. See
“Setting Up Event Logging and Notification” on page 15 for more information.
7. Click
OK to close the Edit Metric dialog.
8. Click
Apply.
Related CLI Syntax to Modify Threshold and Notification Properties
#(config) alert threshold metric_name warning_threshold
warning_interval critical_threshold critical_interval
#(config) alert notification metric_name notification_method
where metric_name refers to cpu-utilization, license-utilization, license-
expiration
, memory-pressure, or network-utilization.
Getting A Quick View of the SG Appliance Health
The Management Console uses the health monitoring metrics to display a visual
representation of the overall health state of the SG appliance. The health icon is located in
the upper right corner of the Management Console and is always visible.
5a
5b
5c
5d
6