Appliance Trim Kit User Manual

Volume 9: Managing the Blue Coat SG Appliance
12
To delete a key:
SGOS#(config sshd) delete director-client-key clientID
Monitoring the System and Disks
The System and disks page in the Management Console has the following tabs:
❐ Summary
Provides configuration information and a general status information about the device.
❐ Tasks
Enables you to perform systems tasks, such as restarting the system and clearing the
DNS or object cache. See Chapter 3: "Maintaining the SG Appliance" for information
about these tasks.
❐ Environment
Displays hardware statistics.
❐ Disks
Displays details about the installed disks and enables you take them offline.
❐ SSL Cards
Displays details about any installed SSL cards.
These statistics are also available in the CLI.
System Summary
The device provides a variety of information on its status. The fields on the Summary tab
are described below:
❐ Disks Installed—the number of disk drives installed in the device. The Disks tab
displays the status of each drive.
❐ Memory installed—the amount of RAM installed in the device.
❐ CPUs installed—the number of CPUs installed in the device.
❐ Software image—the version and release number of the device image.
❐ Serial number—the serial number of the machine, if available.
❐ System started—the time and date the device was started.
❐ CPU utilization—the current percent utilization of the device CPU.
To view the system summary statistics:
Select
Maintenance > System and disks > Summary.
Note: The SG 400 appliances do not have an Environment tab.