User guide

Vario L2 Introduction
Page | 7
Manual Organisation
This manual describes in detail the Vario L2 range of Small Form-Factor PCs.
We have tried to include as much information as possible but we have not duplicated information that is provided
in the standard IBM Technical References, unless it proved to be necessary to aid in the understanding of the
product.
The manual is sectioned as follows:
1. Introduction
2. Quick Start
3. General Precautions
4. Product Specifications
5. Installation, including Layout, connector details and what software to install
6. Bios Setup
7. Maintenance details
We strongly recommend that you study this manual carefully before attempting to interface with the Vario
L2(SBC) or change the standard configurations. Whilst all the necessary information is available in this manual
we would recommend that unless you are confident, you contact your supplier for guidance. IT IS
PARTICULARLY IMPORTANT THAT YOU READ THE SECTION 'GENERAL PRECAUTIONS' BEFORE
HANDLING ANY COMPONENTS INSIDE THE UNIT.
If you have any suggestions or find any errors concerning this manual and want to inform us of these, please
contact our Technical Services department with the relevant details.