User guide

Vario L2 BIOS Setup
Page | 26
External Cache – Options Enabled (default) Disabled
This option allows you to enable or disable “level 2” secondary cache on the CPU to enhance performance
Quick Power on Self Test – Options Enabled (default) Disabled
If enabled, this allows the system to skip certain tests while booting. This speeds up the boot process
Swap floppy drive – Options Disabled (default) Enabled
No floppy drive fitted so leave this set to Disabled
Boot Up NumLock Status - Options On (default) Off
This setting determines the initial power-on state of Numpad keys. On, and they are set to number keys, Off and they are
se to arrow keys
Typematic Rate Setting – Option Disabled (default) Enabled
This setting determines the keystroke repeat rate for the controller. When enabled, the user can choose faster response
when keys are held down
MPS Version Control for OS – Options 1.4 (default) 1.1
Version 1.4 is used for Windows 2000, Windows XP and later. Version 1.1 is used for older OS’s such as Windows NT
OS Select for DRAM >64MB – Options Non-OS2 (default) OS2
Leave at default, OS/2 is not supported
HDD S.M.A.R.T. Capability – Options Disabled (default) Enabled
The Self Monitoring analysis and Reporting Technology (SMART) enables a PC to attempt to predict the possible failure
of storage drives