User guide

Vario L2 BIOS Setup
Page | 21
Section 6 – BIOS SETUP
BIOS Setup
To enter the BIOS setup Pages, press <DEL> during POST.
Navigation through the different menus is via the Arrow Keys as explained in the bottom panel. Up/Down arrows
navigate through the items in a particular menu, and Left/Right arrows navigate between Menu’s.
If entering a sub-menu, <esc> will take you back up to the previous level.
Pressing <F6> at any time sets the BIOS to its Default settings, and pressing <F10> at any time will prompt to Save the
settings prior to exit. The Vario L2 will then reboot and load the desired settings.
Figure A: Navigation Keys
The following section provides the options available under the different menu’s.
Warning: Selecting the wrong settings may cause system
instability.
If this occurs, enter BIOS and select Default Settings