User guide

Vario L2 Installation
Page | 19
Picture 9: Compact Flash
The compact Flash Adapter is mounted onto a plate which utilises the same mounting holes and screws as the
HDD. Consequently, only one of these items can be fitted at any one time
PCI Device Removal
Picture 10: PCI Devices
Before PCI Devices (shown as A in Picture 10 above) can be removed, it is necessary to remove screw B and
Insulator C. The Insulator is to prevent any pins or components on the rear of the PCI card from shorting against
the LID.
Note: PCI card options are only available at time of order. If ordered without PCI expansion, the Riser card and
insulator will not be supplied