User manual

PE3M Small Form Factor PC Upgrading the System Hardware
Page 29
Using two M2 x 3mm cap-head screws, fix the CD/DVD Mounting Bracket to the cut away side of the
drive (see diagram).
Fit the CD/DVD Interface PCB to the drive connector and secure it using two M2 x 6mm screws through
the plastic bushes into the drive body (see diagram).
CD/DVD
IInterface
Board
Fit the drive and PCB assembly to the Removable-Drive Baseplate, so that the tab on the CD/DVD
Mounting Bracket engages with that on the Baseplate.
Assemble the drive to the Baseplate using two M2 x 3mm and one M3 x 6mm cap-head screws.