User manual

PE2M Small Form Factor PC User Guide - Specification
Page 8
Specification
CPU Intel Celeron and Pentium III FC-PGA processors from 300 to 1.13+ GHz, and
FC-PGA2 processors to 1.40 GHz with 66/100/133 MHz FSB.
Chipset Uses the VIA VT8604 AGP and VT82C686B Chipset. Selects FSB speed from
within the BIOS.
Graphics Controller Integrated controller with 3D pipelined architecture, full 2D and motion video
acceleration. Provides digital video output. Uses 4 to 32 MB system memory as
frame buffer.
Memory Two 168-pin DIMM sockets for 128, 256 or 512 MB of PC100 or PC133
compliant 3.3V SDRAM. Provides up to 1 GB of system memory.
Audio On-board AC'97 2.1 Link for Audio and Telephony CODEC. Independent audio
and modem PCI functions.
Expansion Slots One 32-bit PCI slot riser card for short PCI expansion card.
Primary Storage One 2½-inch IDE UDMA33/66 hard drive as standard.
Secondary Storage Optional IDE UDMA33/66 second hard drive, or slim-line CD-ROM, or slimline
DVD-ROM or 3½-inch floppy disk drive.
External I/O Interface PS/2 mouse connector.
PS/2 Keyboard connector.
Standard VGA connector.
Two 9-way Serial connectors (16550 compatible).
25-way Parallel port connector (SPP, EPP, and ECP).
Two USB connectors.
RJ-45 Ethernet LAN connector.
IEEE-1394 'Firewire' connector.
Audio Microphone In (mono, 600 Ohms max), and Line Out (stereo) sockets.
Indicators Power On LED, Hard drive activity LED
Control Power standby pushbutton switch,
Recessed processor Reset switch.
Power Requirements 100 - 240 V, 2.5 A, 47 - 63 Hz, IEC320 power inlet.
Environmental Conditions Operating temperature range +5 ºC to +40 ºC in free air.
Storage temperature range -20 ºC to +70 ºC
Relative Humidity 10-85% non-condensing.
Shock and vibration to conform to light industrial usage