User manual

PE2M Small Form Factor PC Software Configuration
Page 14
Microsoft Windows 2000
Video Drivers
The Video drivers are located on the CD at
\Drivers\Video\Win2000
To add a Display Adapter navigate to Control
Panel then Display/Settings, click "Display type",
select "Change" then click "Have Disk". Browse
to the location of the Drivers on the CD select "S3
Graphics Inc, ProSavage Display Driver".
Windows 2000 will prompt with a warning about
the driver not being digitally signed. This is
normal and must be accepted to continue the
installation.
Close dialogue boxes reboot and set video resolution to complete the installation.
Audio Drivers
The Audio Drivers are located on the CD at
\Drivers\Audio\
Run Setup.exe and follow instructions to install
the "Via PCI Audio Controller (WDM)" Driver.
Windows 2000 will prompt with a warning
about the driver not being digitally signed. This
is normal and must be accepted to continue the
installation.
LAN Drivers
The RTL8139 is currently fully supported by a
generic install of Windows 2000 Pro
VIA 4 in 1
Select Start then Run and type
Drivers\VIA_4_in_1\setup.exe
Select all the components and install each, as in
the example shown. Restart the Computer when
requested.