User manual

PE2M Small Form Factor PC Software Configuration
Page 13
Microsoft Windows NT4
Video Drivers
To add a Display Adapter navigate to Control
Panel then Display/Settings, click "Display
type", select "Change" then click "Have Disk".
Browse to the location of the Drivers on the
CD for instance
\Drivers\VIDEO\NT4\
Select "S3 Graphics Inc, ProSavage Display Driver". Close dialogue boxes, reboot and set video
resolution to complete the installation.
Audio Drivers
Run SETUP.EXE within the
\Drivers\Audio\
directory on the CD, the VIA PCI Audio Driver
Setup program will start, follow the on screen
instructions
Add both the VIA PCI Audio Controller and VIA
Midi External Port as shown. Do not add the
Joystick device.
LAN Drivers
Select "Add Network Adapter" from the network
ICON in control panel in the normal way, point it to
\Drivers\Lan\NT4
on the CD.
Add the RTL8139 Family PCI Fast Ethernet Adapter
as shown. Close Dialogue boxes and finish
installation.
VIA 4 in 1
Select Start then RUN and type
Drivers\VIA_4_in_1\setup.exe
Select all the components and install each, as in the
example shown. Restart the Computer when
requested.