User guide

Magnum N270 Installation
Page | 18
Note Connector Type: 26-pin (13 x 2) 2.00mm-pitch header
LVDS Connector
Pin
CN_INV Description
1
+12V
2
GND
3
GND
4
GND
5
ENABKL
Figure 16: LVDS
Pin
Description
Pin
Description
1
LCDVCC
2
LCDVCC
3
GND
4
GND
5
BTX0-
6
ATX0-
7
BTX0+
8
ATX0+
9
GND
10
GND
11
BTX1-
12
ATX1-
13
BTX1+
14
ATX1+
15
GND
16
GND
17
BTX2-
18
ATX2-
19
BTX2+
20
ATX2+
21
GND
22
GND
23
N/C
24
ACLK-
25
N/C
26
ACLK+
27
GND
28
GND
29
BCLK-
30
N/C
31
BCLK+
32
N/C
33
GND
34
GND
35
N/C
36
N/C
37
N/C
38
N/C
39
N/C
40
N/C
To use the LVDS connector you need the following components:
1. A panel with LVDS interface
2. An inverter for the panel’s backlight power
3. A LCD cable and Inverter cable
4. The BIOS setup correctly to support your Panel Type
Because every panel has its own pin assignment and connector type, a standard cable is not available, however,
check with Blue Chip technology Sales who may be able to supply a suitable Panel with pre-assembled cable.
The Magnum N270 can support a TTL type display via a custom interface module. Please contact Blue Chip
technology Sales for further details.