User guide

Magnum N270 Quick Start
Page | 11
Quick Start
The following sections explain how to install your Magnum N270 computer board.
First ensure that you are familiar with the contents of the section "Precautions". It contains important
information to avoid damage to the board.
Mount the computer board in a suitable chassis.
Note: it is important to ensure that the on-board connectors are attached to a suitable plate before attaching
external cables to prevent damage to the connectors
The following pictures show the Magnum N270 mounted in the Blue Chip technology Vario A1 chassis
Connect the display to the VGA connector, and connect any other signals, e.g. LAN. Connect a PS/2 mouse and
keyboard to the unit. Connect the power lead to a suitable AC power source.
Press the 'Power On' button and check that the unit boots up.
The section "Software Configuration" contains details for the common operating systems.
Set up the required video display parameters.
If PS/2 mouse and keyboard are to be used and removed for normal operation, shut down the computer and
switch off the power before removing them.