User guide

Alpha Panel Mount Firmware
Page | 45
The current settings of the board are populated automatically, including Serial Number, MAC Address,
Firmware Revision, current Boot device and Display output
Splash Screen
The Utility allows a customer Splash screen to be installed on the RE2. Just load an image and press the update
button and the image will be displayed on the RE2 screen. If the image is smaller than the display resolution –
for example a 640x480 image with screen resolution of 800x600 – then the image will be centred on the screen.
For the above example this would then show a black border around the image.
The Utility offers the option to resize the image automatically, which overcomes the need for multiple Splash
screens of different sizes. However, if selected, then this will resize the image to the screen resolution at that
time. If the RE2 is subsequently connected to a lower resolution display, then a “black” image will appear
instead of the expected Splash screen.
Linux Firmware
Refer to the relevant RE Linux User Guide for the equivalent methods of setting up the unit under Linux