User guide

Alpha Panel Mount Installation
Page | 26
Connector Locations
4.3” Display
The main connections for the 4.3” Alpha Panel Mount unit are shown above.
On the 4.3” with a RE2 fitted, an optional CM1 card can be included to offer GPS/GSM/GPRS support. If fitted the
rear connection would like below
The unit on the left, includes a rear cover, while the unit on the right is the open frame version
7” Display
The main connections for the 7” Alpha are shown above. Below the optional connections are shown: Note that this
shows fitment of both Communication module and the Camera module, where as in reality only one of these
modules can be fitted at a time.