Specifications

QUICK REFERENCE CATALOG Crossing Arms 13-1

MOUNTING BRACKET KITS FOR

CROSSING CONTROL ARMS

Proper installation and mounting of crossing arms is essential to provide greater operating efciency. The

applications listed below are the most popular kits which are known to work as they were intended. These

kits may, and, in fact, probably do work in other applications. Please consult Specialty Manufacturing

Company’s Engineering Department if a question arises as to a possible application.

All kits include brackets and mounting hardware necessary for their designed application.

KIT NO. DRAWING DESCRIPTION

08300782

Navistar 3000 chassis from 1989 to present. Use

with air and vacuum units. Bus must have swept

back bumper. Does not include splash shield.

8040

(8041)

Designed for buses using a at bumper. Typical ap-

plications include Ford and Navistar. Can be used

with 5-Series, air, or vacuum units.

04322855

Ford B700 from 1984 to present. Bus must have

contoured bumper. Can be used on 5-Series, air, or

vacuum. Includes splash shield.

04322848

Designed for various model chassis. Can be used

for 5-Series, air, and vacuum units. This kit has

been used in the past on older model Ford, Chev-

rolet, GMC, International, and Ford Econoline Van

(1980-1991). Includes splash shield for use on IH

S1800.

04314357

Chevrolet chassis from 1990 to present. Bus must

have contoured bumper. Can be used on 5-Series,

air, or vacuum units.

(8047)

Thomas FWD control and pusher buses. This is a

Thomas-exclusive kit, but may be usable on other

chassis.