User guide

P25 End User Guide

4.2 Inserting the paper roll

The P25 uses a roll of single-ply, thermal-sensitive paper 58 mm wide and 40 mm or less in diameter. A

pink out-of-paper indicator line appears on the edge of the paper approximately 18 inches before the end of

the roll. When this line appears, there is enough paper remaining for at least one more transaction.

Warning:

− Only use paper rolls that meet the specifications.

− Do not use paper rolls that are glued to the spindle as the printer will not be able to detect the paper end.

To install the paper roll in the printer, follow these steps:

Open the paper cover by applying your pressure with your fingers to both sides of the cover release, and

squeeze to release the lock.

a. Open the lid.

Figure 3: Open the lid

b. Insert the shaft into the paper roll.