Specifications

P25 Development Guide
www.bluebamboo.com
16
[Note]
1 Only the lowest bit of n is valid.
2 This command is available for built-in and user-defined characters.
3
When white/black reverse printing mode is on, it also applies to character
space set by ESC SP.
4 This command does not affect the space between lines.
5 White/black reverse mode has higher priority than underline mode. Even if
underline mode is on, it is disabled (but not canceled) when white/black
reverse is on.
2.4 Keypad Button Commands
The printer supports the following commands for enabling and disabling the keypad buttons.
Command
ESC c 5
Enable/disable keypad buttons
ESC c 5
[Name] Enable/disable keypad buttons
[Format] ASCII ESC c 5 n
HEX 1B 63 35 n
Decimal 27 97 53 n
[Range] 0 ≤ n ≤ 255
[Description] Enable or disable the keypad buttons.
When the LSB is 0, it enables the keypad button
When the LSB is 1, it disables the keypad button
[Note]
If keypad buttons are disabled, all buttons in panel are disabled (including
POWER button, in other words, user could not press key to power off P25,
but user could use command to power off P25).
2.5 Print Position Commands
The printer supports the following commands for setting the print position.
Command
ESC $
Set absolute print position
ESC a
Select justification
HT
Horizontal tab
ESC D
Set horizontal tab positions
GS L
Set left margin