Installation guide

ManualsBrandsBlue Bamboo ManualsComputer equipmentP25

Step 1:

Turn the Blue Bamboo printer on by

pressing the power button.

Step 2:

Enable Bluetooth on your iPhone, iPod touch, or iPad by

going into Settings, and tapping Bluetooth. Switch your

Bluetooth setting to ON, as seen in the screen shot on the

left. Your phone will now be able to locate the printer as a

device that it can connect to. Tap on the name of the

device that appears.

How To: Set up your Blue Bamboo printer

This tutorial will guide you through the process of setting up your new

printer, allowing you to print customer receipts.

Step 3:

You will then be asked to

enter the Printer’s unique

PIN number in order to

complete the connection.

This PIN number can be

found inside the printer,

underneath the roll of

paper, as seen on the left.

Simply push up on the

paper-slot’s door to lift

open the printer.

Summary of content (4 pages)

PAGE 1
How To: Set up your Blue Bamboo printer This tutorial will guide you through the process of setting up your new printer, allowing you to print customer receipts. Step 1: Turn the Blue Bamboo printer on by pressing the power button. Step 2: Enable Bluetooth on your iPhone, iPod touch, or iPad by going into Settings, and tapping Bluetooth. Switch your Bluetooth setting to ON, as seen in the screen shot on the left. Your phone will now be able to locate the printer as a device that it can connect to.
PAGE 2
! The printer’s light will turn blue, indicating that you have successfully connected. You are now able to print receipts for your customers from Flash Valet. Now, when you are closing out a customer’s ticket, an option to print the receipt will appear. You are also able to print a receipt from a ticket’s details from the app’s History report. Success! Below you will find the Blue Bamboo Printer Installation Guide for your reference. We hope this has been helpful.
PAGE 3
Front Packing List Back P25 Printer Quick Installation Guide Buckle screw P25 / P25-M / P25i / P25i-M PIN code Printer Paper cutter Paper Battery release Power jack Power button Power Adapter USB or Serial Cable Shaft MSR USB or Serial port (P25-M and P25i-M only) LED indicator Feed button Mode button Battery Version 4.
PAGE 4
Load Paper MSR (P25-M & P25i-M only) 1. Ensure the magnetic stripe faces away from the printer. The battery pack is located at the bottom of the printer. To install it please follow these steps: 1.Open the lid. 2. The magnetic stripe reader (MSR) can read tracks 1/2/3 in both directions (bidirectional). 3. MSR data can be transmitted via Serial, USB, or Bluetooth. Install Battery 1.Remove the rugged case. 2.Insert the shaft into the paper roll. 3.Install paper roll with paper pointing up. 2.