User guide

P25 Series End User Guide
www.bluebamboo.com 16
Flashing type
Red , Green, Blue
Error description
Check
Steps
Remedy
There is no more paper 1
The paper cover is open 2
Add paper
Close the paper cover
An transmission error
occurred
3
Check the transmission
status
An overheat error occurred 4
Wait until the print head cools
down
Battery voltage is low 5 Charge the battery
Note:
− If an error has occurred while charging, the LED will show the above error messages.
5.2. Printer Test Receipt
Printer test receipt displays all the configuration status of the printer. Hold the Mode button and press
the Feed button at the same time to start the test.
(
B R R
)
(B R R R)
(B R R R R)
(B R)
Mode button
Feed button
Power button