TANK 4.
Table of Contents Safety Information 3 Appearance and Key Functions 5 Installation and Charging 6 Safety Password 9 Call Functions 10 Contacts 12 Messaging 14 Internet Browser 16 Settings 16 Application Programs 20 Gallery 22 Camera 23 Music 24 Network Connections 25 2
Safety Information Please carefully read the terms below: Use Safely Do not use your mobile phone where it might cause danger. Transportation Safety Please observe all transportation laws and regulations. Please drive with both hands on the wheel. DO NOT TEXT AND DRIVE Hospitals Please follow limitations. Please turn off your mobile phone when near medical instruments. Airports Please follow all flight safety regulations and do not use your phone during flight.
Toxic Chemicals Do not use your mobile phone around fuels or chemicals. Explosion Hazard Please observe related limitations and do not use your mobile phone around an area where explosions may occur. Accessories and Batteries Please use only Blu authorized accessories and batteries. Backup Please remember to make a backup or keep a written record of all important information saved in your mobile phone. SOS Emergency Calls Make sure your mobile phone is switched on and in a service area.
Appearance and Key Functions Receiver Power Headphone s Camera Volume USB LCD Battery Cover Back Speaker Menu Home 5
Installation and Charging Battery Removal and Installation The phone battery may be removed as per the following procedures: 1. Open the battery cover from the bottom notch (As per the arrow position shown in the figure) Figure 1 2. Open from the gap at the bottom and open from two sides (As per the arrow position shown in the figure) Figure 2 3. Put your fingernail deep into the gap and open the battery case (As per the arrow position shown in the figure) Figure 3 4. The battery cover is fully removed.
2. Place the battery cover slightly on the phone body and press the cover downward as per the direction shown in Figure 6 until it is fully engaged with the phone body. Figure 6 Note: Be sure to power off the phone and remove the external power source before battery removal. It is absolutely prohibited to take out the battery directly when the phone is powered on, otherwise, the SIM card and the phone may be damaged.
SIM card Installation and Removal The metal contact surface of the SIM card may be easily worn. Remove the SIM card carefully before inserting it into the phone. Power off the phone, remove the battery and other external power source. Insert the SIM card into the SIM card slot. Ensure that the metal surface of the SIM card faces downward when inserting it into the SIM card slot (As shown in the figure).
Note: Please power off the phone before memory card removal. Otherwise, documents transmitted to the phone may be lost or the phone may not work normally. Power On/Off Ensure that the battery has been installed properly. Power the phone on by long pressing the [Power key] until the phone screen shows that the phone is on. Some SIM cards have PIN codes. Enter your PIN code if it is required. The initial PIN code is 1234.
card will be locked automatically which can be unlocked by entering the PUK code correctly. The PIN code is related to the SIM card rather than the phone. It is provided by the network operator. PUK Code The PUK code is used to unlock a SIM card which is locked. If the PUK code is entered incorrectly for 10 times in total, the SIM card may no longer be used. The PUK code is provided by the network operator.
Make an international call: Enter the country code, district number and telephone number (without a space) and press the dial key on the touch screen to make the call. Press the 0 key for seconds if you need to dial “+” when entering the country code. Make an Emergency Call You can enter the dialing interface to make an emergency call even when the SIM card has not been installed or the SIM card has been locked. Cancel a Call Press the End key in the dialing interface to cancel a call.
Call Logs Access the call log to find the logs of all calls, missed calls, dialed calls and received calls, the telephone number or contact name. You can carry out the following operations about the call function of the phone: 1. Call the number or contact. 2.
Import/Export Press Menu key-> Import/Export: The contacts can be imported and exported to the phone from the SIM card and the SD card. The contacts in the phone may also be exported to the memory card for backup. Search Press People-> Search icon-> to enter the Contact Search interface. When the characters you have entered are related to the contact name, the contact name will appear under the search box. Edit Contacts Enter a contact and press the menu key and then edit to make changes to the contact.
Enter a contact and press the Menu key-> Delete Contact . Messaging Write an SMS (MMS) 1. Enter the SMS interface and touch the icon to compose. 2. Enter the number of the recipient or contact name in the recipient bar. Beneath of the recipient bar will display the matched contact or phone number when entering a phone number or name. Press the matched contact or entered phone number or continue to enter the desired phone number. 3.
The phone will ring or vibrate and will display a notification icon in the status bar when receiving a new SMS. Note: To change the notification settings of new SMS, press the menu key under the SMS interface and press the “Settings”. Read an SMS To read an SMS: 1. A notification will alert you when a new SMS message arrives in status bar. Press the message icon in the status bar to read the SMS. 2. Press the Messaging icon in the applications menu.
Press the “Menu” in the SMS Conversation List interface and select “Setting” to modify the SMS settings Internet Browser Enable Browser Press the application program button main interface to enter the browser. and press the icon or press the icon in the Enter a Website Press the URL input box at the top of the screen, enter the URL address of the website. Exit the Browser Press the menu key at the current website interface to pop up the menu and press Exit.
phone will search and connect to a Wi-Fi the network automatically. If the WLAN connection is not available, you may use GPRS/HSPA connection. Note: GPRS/HSPA connection depends on the service provider of the SIM card in the phone. Flight Mode When enabling the flight mode, all wireless functions of the phone will be disabled, including call functions, data service, Bluetooth and Wi-Fi. The flight mode can be enabled by the following steps: Press Settings-> Wireless and Networks->More->Flight Mode.
Press Settings -> Wireless and Networks -> Wi-Fi Settings -> Add Wi-Fi Network. Enter the available network SSID and select its safety type, the phone will add the Wi-Fi to the network list automatically. Bluetooth You can use Bluetooth wireless technology to establish wireless connection with other compatible phones. The phone can also be connected to a compatible Bluetooth headset for communication and music listening. Turn On/Off the Bluetooth: Setting -> Wireless and Networks -> Bluetooth.
You can adjust the display brightness as required. You may enable/disable the “Auto-Rotate Screen” function to set animation. Safety Enter the setting-safety interface to set up screen lock and SIM card lock, enable/disable password visible function, equipment management and credential storage.
Date and Time Set the date and time format and time zone. About Your Phone The user may view the phone information such as status, power use, and legal information. Application Programs Calculator The phone supports basic mathematic calculations and also supports trigonometric functions, exponents and logarithm calculations. Touch the calculator icon to enter the calculator interface.
Edit Activities Select a calendar date in the calendar interface to enter the event interface. Once in the event interface, press the edit icon to edit the event. Delete Activities Enter the activity in the calendar and press the menu key then press the trash bin icon delete the activity. to If you have set an alert for the event, a notification icon will appear in the status bar with the forthcoming event and prompt you with a ring tone that the event will happen soon.
2. If you have set one or several alarm clocks, click on the alarm clock icon in the left to disable or enable the alarm clocks. Alarm Clock Settings If you have set one or several alarm clocks. Select alarm clocks already set, you may change alarm clock settings such as the alarm clock volume, snooze duration, auto-silence and volume buttons. Radio The phone also provides radio function. You can listen to a radio after inserting the headset into the proper jack and enter the FM interface.
Press Application Menu -> Gallery. Click on the picture thumbnail to view a picture. You may double-press the picture to zoom in/out, slide left or right to switch to different pictures. You may press the menu key and select Play Slides to play all pictures as a slide. Camera Open the Camera Press Application Menu -> Camera Change Camera Mode Pressing the camera mode icon camera.
Music Copy Files to Memory Card Connect the phone to a PC via a USB cable to copy music files into the memory card directly; or place the memory card into a reader. Note: The music application program only plays the audio files in your memory card. Ensure that desired audio files have been copied into your memory card before they are played.
Network Connections USB Mode You may connect your phone to a computer via USB cable to transfer music, pictures, and other files between your phone's SD card and the computer. When connecting your phone to computer and mounting its SD card, you must follow your computer's instructions for connecting and disconnecting USB devices to avoid damaging or corrupting files on your SD card. 1. Use the USB cable that came with your phone and to connect the phone to a USB port on your computer.
Phone Considerations 1. The phone is an IP67 waterproof cell phone, which can meet the waterproof and dust proof requirements of a normal living environment. Do not remove the battery cover frequently when unnecessary, cover the headset soft plug, the USB soft plug and battery cover tightly. 2. Do not apply headset function in the water. 3. Touch screen function of the phone is not available when it is in water. 4.
