Installation & Assembly

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
PT. 9016 x 1
Additional Information
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt and fingerprints, use quality cleaners formulated for
wood and metal furniture. Wipe completely dry with a soft cloth in the direction of the wood grain.
Step 06
ADJUST GLIDES AND TIGHTEN REMAINING BOLTS.
Use a leveling device and adjust the glides on the
uprights to ensure that the shelves are level and the
uprights are plumb.
Tighten the remaining pre-installed bolts on the
exterior of the side uprights as shown.