Installation & Assembly

[e-mail] | 2ASSEMBLY NOTES
PT. 1682 x 12 PT. 9016 x 1
1 2
3/16” gap between
upright and bolt head
Step 01
PRE-INSTALL BOLTS AND POSITION ADJUSTABLE GLIDES.
Using the provided hardware, pre-attach the bolts to
the side uprights, leaving a small gap as shown for shelf
attachment on later steps.
The uprights contain floor glides that are recessed into
the base and adjustable with a wrench (not included
with product). Rotate the glides to a position that
reveals enough material so that your wrench will fit.
Do not remove the glides completely.