User guide

4
STEP TWO: Pairing with an Audio Accessory
*
* Turn the radio on while holding down the Talk button on the BluComm Adapter.
Turn off the radio that the BluComm Adapter is connected to. Wait at least three seconds.
* Continue to hold the Talk button down for approximately three seconds. Release the Talk button
when the status LED begins to flash two times per second.
* The BluComm Adapter is now in audio accessory pairing mode. Activate the pairing mode on your
compatible wireless audio accessory.
* Once the wireless audio accessory and BluComm Adapter are paired with each other, the status LED
on the adapter will show a constant blue light for three seconds.
* If the BluComm Adapter does not detect a compatible wireless accessory within 60 seconds of being
put into pairing mode, the adapter will exit the pairing mode and resume normal operation.
* Once successfully paired, you will be able to operate your two-way radio using your compatible
wireless accessory.
Pairing With an Audio Accessory