Installation & Operation Instructions

RED
VIO
GRY
+
0-10 VDC DIMMING OUTPUT
-
BRN
BLK
RED
BLK
BLU
YEL
BLK
BLU
WHT
WHT
WHT
N
277V
120V
OR
CONTROL INPUT
**
COMMON
+VDC OUTPUT
CLASS 1
WIRING
CLASS 2
WIRING
*
*
* CAP UNUSED BLACK OR YELLOW WIRE
BRN
RED
YEL
RELAY STATUS
SWITCH OUTPUT
BLK
SWITCH INPUT
RELAY STATUS
OUTPUT
YEL
+VDC INPUT
COMMON
COMMON
+VDC INPUT
OCCUPANCY OUTPUT
** IF NO SENSORS ARE WIRED
OR WIRELESSLY LINKED, CONNECT
WHITE WIRE TO RED.
LOW VOLTAGE SENSOR
(e.g. SWX-201-1)
SWX-801
LOW VOLTAGE SWITCH
SWX-950-AX-D2
HYBRID
WIRELESS/WIRED
DIMMING
POWER PACK
120V/
277V
0-10V DIMMABLE LOAD
MODEL #: SWX-950-AX-D2
SWX-950-AX series power packs can supply power to several occupancy sensors and additional secondary relay packs. Following the below formula ensures adequate power will be
available. Note the SWX-950-AX’s relay has already been factored into the formula.
[ (# of PIR SENSORS*) x2mA ] + [ (# of DUAL TECH SENSORS) x10mA ] + [ (# of SWX-910) x55mA ] < [ (# of SWX-950-AX) x90 mA]
PIR SENSORS OR
LOW VOLT. WALL SWITCHES
+
DUAL TECH SENSORS
+
SECONDARY PACKS
SWX910
=
TOTAL
POWER
REQUIRED
<
POWER
SUPPLIED
BY ONE
SWX950AX
#
POWER
REQUIRED
#
POWER
REQUIRED
#
POWER
REQUIRED
15 30mA + 0 0 + 0 0 = 30mA < 90mA
15 30mA + 0 0 + 1 55mA = 85mA < 90mA
0 0 + 9 90mA + 0 0 = 90mA < 90mA
7 14mA + 8 80mA + 0 0 = 94mA < 90mA
POWER PACK CAPACITY
*or low voltage wall switches
EXAMPLE COMBINATIONS
COMPATIBLE WIRELESS DEVICES
MODEL # DESCRIPTION WIRELESS TYPE POWER TYPE
SWX-201-B Small Motion 360° Sensor, PIR Transmit Battery
SWX-401-B Wide View Sensor, PIR Transmit Battery
SWX-402-B Long Range Hallway Sensor, PIR Transmit Battery
SWX-851-xx Wall Switch Load Controller, No Neutral Required, <xx = color> Transmit & Receive 120-277 VAC
SWX-852-B-xx Remote Switch (On/Off), <xx = color> Transmit Battery
SWX-854-B-xx Remote Dimming Switch (On/Off, Raise/Lower), <xx = color> Transmit Battery
SWX-950 Power Pack Load Controller, 20A Receive 120/277 VAC
SWX-950-D2 Power Pack Load Controller, 20A, 0-10V Dimming Receive 120/277 VAC
SWX-950-AX Hybrid Wireless/Wired Power Pack Load Controller, 20A Transmit & Receive 120/277 VAC
SWX-950-AX-D2 Hybrid Wireless/Wired Power Pack Load Controller, 20A, 0-10V Dimming Transmit & Receive 120/277 VAC
APPLICATIONS
The below chart lists the devices that can be used in a SENSORWORX wireless application. Note that sensors and remote switch & dimmer
devices are transmit only devices and therefore must be linked to a load controller for switching or dimming of lighting.