021A WELLS BLOOMFIELD, LLC 10 Sunnen Drive P.O.Box 430195 St. Louis, MO 63143 USA telephone: 314-781-2777 fax: 314-781-2714 www.wellsbloomfield.
LIMITED WARRANTY STATEMENT Unless otherwise specified, all commercial cooking equipment manufactured by WELLS BLOOMFIELD, LLC is warranted against defects in materials and workmanship for a period of one year from the date of original installation or 18 months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser only.
TABLE OF CONTENTS WARRANTY SPECIFICATIONS FEATURES & OPERATING CONTROLS PRECAUTIONS & GENERAL INFORMATION AGENCY LISTING INFORMATION INSTALLATION OPERATION MAINTENANCE INSTRUCTIONS CLEANING INSTRUCTIONS TROUBLESHOOTING SUGGESTIONS EXPLODED VIEW & PARTS LIST WIRING DIAGRAM PARTS & SERVICE CUSTOMER SERVICE DATA xi 1 2 3 3 4 6 7 8 10 12 - 21 22—25 29 29 INTRODUCTION Thank You for purchasing this Wells Bloomfield appliance.
FEATURES & OPERATING CONTROLS INDICATOR LIGHT TEMPERATURE CONTROL (THERMOSTAT) A. THERMOSTAT On THERMOSTATICALLY CONTROLLED heated tanks, power is applied to the heating element according to the control knob position and the actual temperature at the temperature sensing thermobulb. The desired temperature is controlled by rotating the TEMPERATURE CONTROL KNOB. The knob has a numeric scale, where higher numbers correspond to higher temperature.
PRECAUTIONS AND GENERAL INFORMATION This appliance is intended for use in commercial establishments only. This appliance is intended to hold pre-heated food for human consumption. No other use is recommended or authorized by the manufacturer or its agents. Operators of this appliance must be familiar with the appliance use, limitations and associated restrictions. Operating instructions must be read and understood by all persons using or installing this appliance.
INSTALLATION NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for proper operation. Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual. WARNING: RISK OF INJURY Installation procedures must be performed by a qualified technician with full knowledge of all applicable electrical and plumbing codes. Failure can result in personal injury and property damage.
INSTALLATION 3. For “top-mounted” installation: a. Verify that provided sealants are applied to the underside of the warmer top flange prior to setting the unit into the cutout. b. After installation, verify that the tabs on the Wellsloks are turned out to lock the warmer into the counter. c. Apply a thin bead of food-grade silicone sealant around the flange to seal it to the counter. d.
OPERATION CAUTION: A. WET OPERATION HOT SURFACE Make sure the drain valve is fully closed before turning thermostat ON. Exposed surfaces can be hot to the touch and may cause burns. CAUTION: SHOCK HAZARD DO NOT splash or pour water onto control panel or wiring. Add approximately 1” of hot tap water before turning the warmer ON. Use of hot water will allow a faster preheat. 1. For non-autofill units: check the water level frequently and add hot water as necessary to prevent the tank from running dry.
MAINTENANCE INSTRUCTIONS CARE OF STAINLESS STEEL Stainless steel is a marvelous material: strong, lustrous and low maintenance. With a minimum of care, it will normally retain its beauty and durability for the life of the equipment. In some applications, however, special care is required in order to maintain stainless steel’s special properties. External components, such as cabinets and control panels, are finished with a grain pattern.
CLEANING INSTRUCTIONS CAUTION: SHOCK HAZARD Do NOT splash or pour water into or over any control panel or wiring. DAILY CLEANING INSTRUCTIONS PREPARATIONS: Turn control knob to OFF. Unplug the warmer. Allow warmer to cool before proceeding. Remove any insets, pans and/or adapter tops ( if used). Drain water from tank. FREQUENCY: Minimum - daily.
CLEANING INSTRUCTIONS WEEKLY CLEANING INSTRUCTIONS PREPARATIONS: Remove any insets, pans and/or adapter tops. Drain or remove water from well if used for wet operation. FREQUENCY: TOOLS: Weekly, or whenever lime or scale is seen accumulating on the sides of the warmer pans. Commercial Delime Cleaner Plastic Scouring Pad Clean Cloth or Sponge 1. Add water to pans until water is at normal operating level (1” - 1 1/2” deep) or covers accumulated scale. 2. Heat water to maximum temperature (190ºF or higher).
TROUBLESHOOTING SUGGESTIONS SYMPTOM No power to warmer Warmer will not heat Warmer trips circuit breaker Warmer slow to heat POSSIBLE CAUSE SUGGESTED REMEDY Circuit breaker off or tripped Reset circuit breaker Unit not plugged in Make sure unit is plugged in to power receptacle Temperature control not set Set control to desired temperature Internal damage Contact you Authorized Wells Service Agency for repairs Tank leaking or other internal damage Contact your Authorized Wells Service Agency
M021A 2M-308085 Owners Manual for Built-In Bain Marie Warmers
EXPLODED VIEW: HT200 & HT227 HT-200 and HT-227 1 1 2 3 4 4 HT227 HT200 6 5 7 7 9 8 11 10 12 12 13 17 16 15 14 18 19 20 Model: HT200, HT227 Built-in Bain Marine Style Heated Tanks IL1734 Rev.
PARTS LIST : HT200 & HT227 HT200 & HT227 Built-in Baine Marine Style Heated Tanks Part No P2-31869 P2-301893 DD-302884 P2-301761 P2-303359 P2-302882 2C-30397 2N-46660UL 2N-300706UL WS-501759 PS-302883 D8-303352 2V-47847 2K-34136X P2-306959 2T-45917 P2-40843 I7-Z12221 2J-35687 2R-40498 Qty 1 1 1 2 2 2 AR 2 2 2 2 2 1 1 1 1 1 1 1 1 Description SCREEN DRAIN ASSY WARMER ADAPTER BAR HT200-500 ADAPTER BAR HT327/437 AF SHROUD REAR HT-200 ROHS SHROUD SIDE MODS ROHS SHROUD SIDE HT227/527 AF CLIP ELEM M P ELEM 240V
EXPLODED VIEW: HT300 & HT327 HT-300 and HT-327 1 2 1 3 4 HT-327 4 HT-300 6 5 7 7 9 8 11 10 12 12 13 15 16 M021A 2M-308085 Owners Manual for Built-In Bain Marie Warmers 13 14 17 18 19 20 Model: HT300, HT327 Built-in Bain Marine Style Heated Tanks IL1735 Rev.
PARTS LIST: HT300 & HT327 HT300 & HT327 Built-in Baine Marine Style Heated Tanks Part No P2-31869 P2-301893 DD-302884 P2-304105 P2-303359 P2-302882 2C-30397 2N-46660UL 2N-300706UL WS-501759 PS-302883 D8-303352 2V-47847 2K-34136X P2-306959 2T-45917 P2-40843 I7-Z12221 2J-35687 2R-40498 Qty 1 2 2 2 2 2 AR 3 3 3 3 3 1 1 1 1 1 1 1 1 Description SCREEN DRAIN ASSY WARMER ADAPTER BAR HT200-500 ADAPTER BAR HT327/437 AF SHROUD FRONT REAR HT-300 SHROUD SIDE MODS ROHS SHROUD SIDE HT227/527 AF CLIP ELEM M P ELEM 240V
EXPLODED VIEW: HT400 & HT427 HT-400 and HT-427 1 1 3 2 HT-427 4 HT-400 4 6 5 7 9 7 8 11 10 12 12 13 13 14 18 16 19 20 21 15 Model: HT400, HT427 Built-in Bain Marine Style Heated Tanks IL1736 Rev.
PARTS LIST: HT400 & 427 HT-400 and HT-427 HT400 & HT427 Built-in Baine Marine Style Heated Tanks Part No P2-31869 P2-301893 DD-302884 P2-304106 P2-303359 P2-302882 2C-30397 2N-46660UL 2N-300706UL WS-501759 PS-302883 D8-303352 2V-47847 2K-34136X WS-50131 E7-49046 2T-45917 P2-40843 P2-Z12288 2J-35687 2R-40498 Qty 1 3 3 2 2 2 AR 4 4 4 4 4 1 1 1 1 2 2 1 2 2 Description SCREEN DRAIN ASSY WARMER ADAPTER BAR HT200-500 ADAPTER BAR HT327/437 AF SHROUD FR/RR HT400/427 SHROUD SIDE MODS ROHS SHROUD SIDE HT227/527 AF
EXPLODED VIEW: HT500 HT-500 1 2 HT-500 3 4 5 6 7 8 9 10 12 16 15 14 17 18 13 19 Model: HT500 Built-in Bain Marine Style Heated Tanks IL1737 Rev.
PARTS LIST: HT500 HT500 Built-in Baine Marine Style Heated Tanks Part No P2-31869 P2-301893 P2-304107 P2-303359 2C-30397 2N-46660UL WS-501759 D8-303352 P2-301906 P2-301871 2V-47847 2K-34136X WS-50131 E7-49046 2T-45917 P2-40843 P2-Z12288 2J-35687 2R-40498 Qty 1 4 2 2 AR 5 5 5 1 1 1 1 1 1 2 2 1 2 2 Description SCREEN DRAIN ASSY WARMER ADAPTER BAR HT200-500 SHROUD FRONT / REAR SHROUD SIDE MODS ROHS CLIP ELEM M P ELEM 240V 1200W LLW-1220 PAN ASSY W/ELEMENT BKT THERMO BULB COVER BOT HT500-AF W/O DRAIN COVER B
EXPLODED VIEW: HT527 HT-527 1 HT-527 2 3 4 5 6 7 8 9 10 12 16 15 14 17 18 13 19 Model: HT527 Built-in Bain Marine Style Heated Tanks IL1738 Rev.
PARTS LIST: HT527 HT-527 HT527 Built-in Baine Marine Style Heated Tanks Part No P2-31869 DD-302884 P2-304107 P2-302882 2C-30397 2N-300706UL P2-302883 D8-303352 P2-302998 P2-302997 2V-47847 2K-34136X WS-50131 E7-49046 2T-45917 P2-40843 P2-Z12288 2J-35687 2R-40498 Qty 1 4 2 2 AR 5 5 5 1 1 1 1 1 1 2 2 1 2 2 Description SCREEN DRAIN ASSY WARMER ADAPTER BAR SHROUD FRONT / REAR SHROUD SIDE MODS ROHS CLIP ELEM M P ELEM 240V 1650W 12 X 27" PAN ELEMENT HT-227/527 BKT THERMO BULB COVER BOT HT527/527AF COVER BOT HT
WIRING DIAGRAM HT-200 and HT-227 M021A 2M-308085 Owners Manual for Built-In Bain Marie Warmers 22
M021A 2M-308085 Owners Manual for Built-In Bain Marie Warmers WIRING DIAGRAM HT-300 and HT-327 23
WIRING DIAGRAM HT-400 and HT-427 M021A 2M-308085 Owners Manual for Built-In Bain Marie Warmers 24
M021A 2M-308085 Owners Manual for Built-In Bain Marie Warmers WIRING DIAGRAM HT-500 and HT-527 25
NOTES M021A 2M-308085 Owners Manual for Built-In Bain Marie Warmers 26
M021A 2M-308085 Owners Manual for Built-In Bain Marie Warmers NOTES 27
NOTES 28
PARTS & SERVICE DESCRIPTION PART NO. 6 oz. SOUP LADLE DD-47088 DRAIN VALVE EXTENSION KIT, extension from drain to counter front with remote handle WS-20385 DRAIN SCREEN PS-31869 Wellslok Extension Kits for UL Listed units approved for installation in wood counter tops ** OPTIONAL 72” WIRING, thermostatically controlled warmers ** ** IMPORTANT: Use only factory authorized service parts and replacement filters.
Commercial Food Equipment Service Association Wells Bloomfield proudly supports CFESA Commercial Food Equipment Service Association SERVICE TRAINING - QUALITY SERVICE Genuine Parts Protect - YOU - All - Ways CUSTOMER SATISFACTION WELLS BLOOMFIELD, LLC 10 Sunnen Drive P.O.Box 430195 St. Louis, MO 63143 USA telephone: 314-781-2777 fax: 314-781-2714 www.wellsbloomfield.
