Specifications

6-2 Specifications TOS9220/9221
*2 Only on models that have CE marking on the panel.
Not applicable to custom order models.
*3 This instrument is a Class I equipment. Be sure to ground the protective conductor terminal of the
instrument. The safety of the instrument is not guaranteed unless the instrument is grounded properly.
Item TOS9220 TOS9221
Safety*2, *3 Conforms to the requirements of the following directive and standard.
Low Voltage Directive 2006/95/EC
EN61010-1
Class I
Pollution degree 2
Electromagnetic compatibility
(EMC)*2
Conforms to the requirements of the following directive and standard.
EMC Directive 2004/108/EC
EN61326-1
EN61000-3-2
EN61000-3-3
Under following conditions
1. Used test leadwire TL07-TOS which is supplied.
2. No discharge occurs at outside of the tester.
3. Used the shielded cable which length is less than three meters when
the SIGNAL I/O is used.