Specifications

GETTING STARTED

Check the brewer and satellites:

Check that the brewer is clean and the drip tray (if used)

is empty.

Check that the satellites are empty and clean with lids

properly installed.

Check the spray heads:

Remove the brew chambers. Check the spray heads. Verify

that the spray disks are clean and properly installed. Verify

that the gaskets are properly installed inside the spray heads.

Check the brew chambers:

Check that the brew chambers are clean.

Check that the bypass diverters are properly installed in the

brew chambers.

START-UP

Press POWER SWITCH (back of brewer) to ON. Brewer water

tank will begin lling.

When tank stops lling, press HEATER ON/OFF switch to ON:

READY-TO-BREW light will glow when water is at proper

temperature for brewing.

Press SATELLITE WARMER switches to OFF until ready to

begin brewing.

OPERATING INSTRUCTIONS

Fig. 3 Control Panel

START

BREW

START

BREW

STOP

BREW

STOP

BREW

1 1/2 GAL

1 GAL

1 1/2 GAL

1 GAL

VOLUME

SELECT

VOLUME

SELECT

READY TO

BREW

HEATER

ON / OFF

IL2305, M671

671 2M-Z16955 Owners Manual 9221 Dual Satellite Brewer