Specifications

SERVICING INSTRUCTIONS (continued)

Adjustments to be performed by

qualied technician only.

NOTE:

Brewer is pre-adjusted to deliver

1/2, 1 and/or 1-1/2 gallons of

coffee at a water pressure of

50 p.s.i. Use this procedure to

adjust the delivered volume to

suit local conditions.

Adjust only in small increments

to avoid large volume variations.

Recommend knob be turned no

more than one mark on the dial

plate at a time.

Moving the dial one mark will

change delivered volume by

approximately 6 oz.

BREW TIMER ADJUSTMENT

PRECAUTIONS: None

FREQUENCY: As required to adjust delivered volume

TOOLS: Small athead screwdriver

Satellite or other container to calibrate volume

1. Press TANK HEATER switch to OFF.

2. Remove TIMER ACCESS COVER on front panel. Press

VOLUME SELECTOR to 1 GAL position.

3. Install an empty satellite and empty brew chamber.

4. Press START BREW switch. Brew should deliver 1 gallon

(128 . oz.). If adjustment is necessary, turn TIMER knob:

Turn CLOCKWISE to increase time;

Turn COUNTER-CLOCKWISE to decrease time.

Test after each adjustment. Be sure to empty satellite before

each test.

5. Turn TANK HEATER switch ON.

6. Allow the brewer to come up to brewing temperature, then

perform a test brew. Check delivered volume. Readjust as

necessary.

7. Reinstall TIMER ACCESS COVER.

When desired volume is achieved, procedure is complete.

663 p/n 2M-76061 Owners Manual Satellite Coffee Brewer